Anti-Slip Easy Grip

Anti-slip profiles for stairs

The anti-slip profile of EasyGrip model features slots that cut the studs upwards, allowing easy drainage and making the non-slip profile ideal for walking in spaces where drainage liquids such as oils and sludges have to flow away.

This anti-slip profile is characterized by a low level of slipperiness (low degree of class R), and therefore features a grip which also allows walking in industrial environments which have special workers’ safety requirements.

The Easy Grip surface are in the following materials:

  • Pre-galvanized sheet
  • Stainless steel
  • Peraluman aluminium
  • Carbon steel

If you are looking for a non-slip profile with more close-knit lines and more grip, CMM recommends choosing the Full Grip anti-slip profiles.

CMM produces different types of easy grip anti-slip profiles.

A1 anti-slip profiles are a good solution when an unobtrusive anti-slip surface is needed and provides, thanks to slotted openings, a draining effect for any oils or liquids.

Material Sheet Thickness
Raw steel, Hot dip galvanized steel UNI EN ISO 1461 1,5/2/2,5/3
Pre-galvanized steel 1,5/2/2,5/3
Stainless steel 1,5*/2*
Aluminum 1,5/2/2,5
Maximum dimensions 4000x1500

* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.

B1 profiles are mainly used to construct flatbeds for transporting vehicles, such as for road rescue. The embossing provides excellent grip for tires, without the risk of damaging them.

Material Sheet Thickness
Raw steel, Hot dip galvanized steel UNI EN ISO 1461 1,5/2/2,5/3
Pre-galvanized steel 1,5/2/2,5/3
Stainless steel 1,5*/2*
Aluminum 1,5/2/2,5/3
Maximum dimensions 4000x1500

* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced

GZ anti-slip profiles are characterized by good drainage effect and high slip resistance. Excellent for indoor environments due to the non-invasive texture.

Material Sheet Thickness
Raw steel, Hot dip galvanized steel UNI EN ISO 1461 1,5/2/2,5/3
Pre-galvanized steel 1,5/2/2,5/3
Stainless steel 1,5/2*
Aluminum 1,5/2/2,5/3
Maximum dimensions 4000x1500

* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.

P1 anti-slip profiles are distinguished by their excellent drainage effect and high slip resistance. Excellent for indoor environments due to the not too dense and intrusive texture.

Material Sheet Thickness
Raw steel, Hot dip galvanized steel UNI EN ISO 1461 1,5/2
Pre-galvanized steel 1,5/2
Stainless steel 1,5*
Aluminum 1,5/2
Maximum dimensions 4000x1500

* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.

P2 anti-slip profiles are characterized by good slip resistance. Good for indoor environments due to the not too dense and intrusive texture.

Material Sheet Thickness
Raw steel, Hot dip galvanized steel UNI EN ISO 1461 1,5/2/2,5
Pre-galvanized steel 1,5/2/2,5
Stainless steel 1,5/2*
Aluminum 1,5/2/2,5
Maximum dimensions 4000x1500

* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.

UD anti-slip profiles are characterized by excellent drainage effect and good slip resistance. Also excellent for indoor environments.

Material Sheet Thickness
Raw steel, Hot dip galvanized steel UNI EN ISO 1461 1,5/2
Pre-galvanized steel 1,5/2
Stainless steel 1,5*
Aluminum 1,5/2
Maximum dimensions 4000x1500

* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.

CLOSE
CLOSE